1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 219Get this manual
Assembly f1l 1If the reverse gate was removed during disassembly, install reverse gatebushings ,and shafts to jet housingPosition shafts so holes align with holes where retaining screws make contact2Torque screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely t=l assemble in any other position
3Place roller into cam in position shownThe roller will not
rJl 4Place cam roller on reverse gate stud, and torque nut to 60-84 in Ibs(7-9 Nm)