1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 214Get this manual

1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 214

Bearing Housing Assembly Servicing 1Remove water pump assembly from jet housing L!J bearing

2Remove four bearing housing retaining screws, and remove housing assembly from jet housing'" 3Remove retaining ring with retaining ring pliersWear

i safety glasses and proceed with care to avoid unsnapping the ring from the pliers4Remove O-rings from housing and discardrJl 5Warm bearing housing with propane torch to aid in removal of upper seal carrier
r:-=i Do not apply too much heat as seals or carrier may be N
damaged
'" 6Allow bearing housing to cool until it is warm to the

Back to 1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286