1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 200Get this manual
41 DR3999-DR4000
f4il421 28Install new seals back to back in the bearing housing using OMC Seal Installer, PIN 336311Apply OMC Gasket Sealing Compound to the metal casings of the seals before installing Install the inner seal with lip facing toward the bearing housing, then the outer seal with lip facing away from the bearing housing
OMC Triple-Guard grease to the seal lips after
installing
1441 30Apply OMC Needle Bearing Assembly Grease to the
thrust bearing Position bearing around shoulder on the propeller shaftthrust washer Place washer in recess of bearing housing
1441 31Apply OMC Needle Bearing Assembly Grease to the 145 32Coat bearing surfaces of propeller shaft with gearcase oilSlide the propeller housing on the propeller shaftUse caution when assembling the propeller shaft in the bearing housingThrust bearing must remain around shoulder on the propeller shaft