1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 196Get this manual
f181 21Remove the pinion bearing only if it needs to be replacedBefore attempting removal, take out the bearing retaining ring on top side of the pinion bearingIf the pinion bearing must be replaced, use OMC Bearing Remover and Installer, PIN 391257, and assemble it as follows:
Plate, PIN 391260 Rod, PIN 326582
Nut, PIN 326586
Remover, PIN 326579
Make sure all loose needles are inside bearing case before pulling bearingThe needles will provide surface for the remover tool to pull against
20 Use Pis inwrench to hold the remover in placeUsing 3f4