1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 172Get this manual
EI facing up f61 5
the water tube grommet with the inside taper
[2] 6Install the impeller housing cover f71 7Apply OMC Adhesive sealant to flat side of the impeller housing grommet CDInstall the grommet, flat side down
101 8Lightly coat the liner with oilWith counterclockwise
cam facing out
t!J rotation, install the impeller into the liner with slot for impeller
f81 9Run thin bead of OMC Adhesive sealant in the seal groove, and install the special shaped -ring seal (1)Installation
12l 1Apply OMC Gasket Sealing Compound to both sides of a
new impeller plate gasket Install the gasket and impeller plate
12l 2Apply OMC Triple-Guard grease to new impeller a-ring
Slide the a-ring down the driveshaft until it contacts the impeller plate