1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 144Get this manual

1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 144

Installation
rv housing flangeNo2 gasket sealant to inner exhaust 1Apply Permatex
2Install new base gasket on adapterCoat both sides with OMC Gasket Sealing CompoundTo ensure proper sealing, mating surfaces must be clean and free of oil, grease and foreign matter
3Coat the driveshaft splines with OMC Moly LubeDo not apply lubricant to end of driveshaftUsing hoist, slowly lower powerhead onto exhaust hous-

i torque to 65-70 ftIbs(88-95 Nm)
5Install two steering arm to upper mount screws and

r:;] 6Apply OMC Gasket Sealing Compound to the threaded

Back to 1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286