1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 112Get this manual
STEPSTOP CIRCUIT TEST Elimination Test
[!J 1Separate the 5-pin Packard connector between the power pack and key switch
inAvoid electrical shock; do not handle ignition coils or spark tester leads during test2Crank the engine and observe results at spark testerIf spark now jumps alternately at each gap, the problem is in the stop circuitGo to Ohmmeter TestKey Switch If no spark is present, proceed to next step indicated in Troubleshooting Sequence Chart, Page 3-243Complete all circuits disconnected during this test