1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 106Get this manual
Amphenol Connector Servicing Terminal Removal
Use the recommended lubricant for terminal removalSubstitutes may cause high resistance connections or short circuits between terminals, or adversely affect the connector material1To remove terminal from the plug or receptacle, lubricate it by applying isopropyl alcohol to both ends of the cavity
[!] 2Select the proper removal tool for the terminal:
OMC Socket Remover, PIN 322699
3Place the plug or receptacle against the edge of flat surface and allow clearance for the terminal to be removed1zl 4Insert the removal tool into the terminal and push the terminal from the connectorf'3l 5Pin and socket terminals may be replaced if damagedCrimp new terminals onto the wire at point 6Use OMC Crimping Pliers, PIN 322696, when attaching Amphenol terminals