1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 96Get this manual
Timing Sensor Servicing Removal
1Disconnect the timing sensor plug
rv theRemove the sensor support return spring from its post on 2flywheel cover3Remove the two sensor support retainers
] 4Lift the sensor support from the flywheel coverf4l 5Remove the two screws securing the timing sensor to the sensor supportInstallation
f4l 1Install the timing sensor onto the sensor supportTighten the retaining screws to 15-20 inIbs(1,7-2,3 Nm)2Apply light coating of OMC Triple-Guard grease to the sliding surfaces of the sensor supportPosition the sensor support in the flywheel cover1sl 3Position the sensor support retainersInstall and tighten l=.I the retainer screws