1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 94Get this manual
1sl 8Lift the flywheel cover and tap the throttle shaft out of the throttle arm'7l 9Rotate both the spark lever and the throttle lever to W.O.TLift the flywheel cover, and lift the throttle shaft and cam with it10Remove the flywheel coverDiscard the gasket19l 11Using Snap-on A-144 fixture, or equivalent, remove the flywheel retaining screwsDiscard the screwsf101 12Using the two 3s-24x1 inscrews from OMC Flywheel Service Kit, PIN 434649, secure the tool to the flywheelTwo of the holes in the flywheel are tapped for the toolTurn the center screw and draw the flywheel off the crankshaft To avoid damaging the flywheel magnets, OMC Flywheel Service Kit, PIN 434649, should be your only method of removing and installing the flywheelInstallation