1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 71Get this manual
22 1201 4Inspect float needle and seat for wear or distortion Replace both pieces if necessary5Float should be parallel with the separator cover for correct float height6Adjust the float drop with vapor separator cover in normal positionThe drop dimension to the bottom of float should be between 1-11132 in(32-34 mm)
1221 7Check the hoses and connections for damageAssembly
1231 1Attach the vapor separator cover to the bracket, and tighten screws in an "X" pattern to 18-24 inIbs(2-3 Nm)1241 2Attach the vapor pump assembly to the vapor separator, and tighten screws to 18-24 inIbs(2-3 Nm)1251 31261 415