1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 68Get this manual
Fuel Component Bracket Servicing Removal
Do not attempt to run engine with any fuel system component disconnected or removedFuel leakage could contribute to fire or explosion
r::=J Push fuel hose fuel fittingdon't pullIf pushing won't
separate hose and fitting, carefully cut the hose along its side and peel it back to avoid damaging the fittings
[TI 1Remove cover from fuel and oil fitting bracket2Disconnect fuel and oil hosesRemove screw retaining fuel and oil fitting bracket to lower engine cover and remove bracketf31 3Cut the tie strap securing main fuel supply hose to the starboard carburetor fuel manifoldCarefully push hose off of manifold 4Repeat Step and remove hose from the port carburetor fuel manifoldf41 5Remove ratchet hose clamp securing pulse hose to the pumpCarefully push pulse hose and recirculation hose off vapor pump1sl 6Disconnect the vacuum switch tan and black lead bullet Disconnect the primer solenoid purplewhite and black lead bullet connectors