1993 Johnson Evinrude "ET" 60 degrees LV Service Manual, P/N 508286, Page 67Get this manual
Inspection
'sl1To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms2To test solenoid valve and seat: Lightly pressurize inlet fitting with alcohol and syringe With lever in run positionno fluid should enter inlet fitting With lever in prime positionfluid should come out both outlet fittings
19l3To inspect or replace internal components, remove the four
solenoid cover screws
'10' 4When assembling solenoid, back out screws in their holes