1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 354Get this manual

1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 354

1281 1' 29Oil and install the components of the manual release Nm)
i valveTighten the valve to torque of 45-55 in Ibs(5-6

1291 30Using OMC Retaining Ring Pliers, PIN 303857, install the
retaining ring with sharp edge facing out
1301 31 Slide the rod and cap up far enough to be able to install OMC Universal Spanner WrenchPI 912084Fill the cylinder up to bottom of the threads
f311 32Thread the end cap into the cylinderTorque the end cap to 56-84 ftIbs(76-114 Nm)1321 33Fill the oil reservoir up to the fill plugInstall and tighten

Back to 1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283