1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 345Get this manual
Hydraulic Unit Servicing Removal 1Raise the motor and engage the trailering levers2Remove the blue and green wires from pump motor connector housing
3Remove the spring clip from the cylinder pin 4Remove the cylinder pin
rJl 5Remove one of the 34 inlocknuts from the angle adjustment rod Remove the rod from the stern bracketsf41 6Remove the unit from the stern brackets far enough to remove the ground lead from the pump motor mounting screwDisassembly Thoroughly clean unit before disassemblingScrub all outside surfaces with stiff bristle brush and hot soapy waterThis will prevent dirt particles or other foreign matter from entering the unit while you are working on it