1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 318Get this manual
43 C02817
14317Push core wire CD (from engine end) through wire clamp Q) until wire is flush, 132 in(0,8 mm), with end of casing
14418Turn in set screw on large end of wire clamp until it touches
core wire, then tighten one more full turn to kink and position core wire
14519Grease trunnion pocket in housing halfLift throttle cable
and rotate cable forward until trunnion cap can be inserted into trunnion pocket
146110Position throttle lever by hand to align rear hex screw
with access hole in controlInsert hex wrench through hole and tighten second set screw