1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 268Get this manual
r:;:;J 8Bend the inside loop of the rewind spring in toward the center of the starter housing Engage the slot of the pulley with the inner loop of the rewind spring, and install the pulley in the starter housing L!J
r:;;;J r;;;l 9Place the friction plate sp ring washer and the friction plate on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lock ring
r:J9l 10Be sure the starter pawl bushing is installed in the pulleyApply OMC Triple-Guard grease or Lubriplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulley1191 11housmgthe starter housing spring in the starter