1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 240Get this manual
Assembly
Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable conditionRefer to Cleaning and Inspection, Page 6-5ing Remover and Installer, PIN 391257, as shown: 114-20 112 inHex Head Screw PIN 326584 Spacer in0.0Flat Washer PI 326582 Rod PIN 326575 Installer 114-20 1114 inHex Head Screw PIN 391260 Plate
14211Assemble the following components of OMC Pinion Bear42
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing onto the tool3Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the spacer
1431 4Remove the toolPosition new a-ring CD on the pinion