1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 228Get this manual

1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 228

Installation 1Coat the driveshaft splines with OMC Moly LubeDo not coat the top surface of the driveshaft as lubricant here may prevent seating of the driveshaft in the crankshaft2Slide the gearcase into place making sure that the driveshaft engages the crankshaft and the water tube of the inner exhaust housing enters the water pump r:jl

3Apply OMC Nut Lock to threads of the retaining screwsInstall and tighten all the screws to the following torques:
Gearcase Retaining Screws

inscrew

18-20 ftIbs(24-27 Nm) 28-30 ftIbs(38-40 Nm)

Back to 1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283