1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 169Get this manual
142145Install starboard lower engine cover mount bracket and torque screws to 60-84 inIbs(7-9 Nm)46Install the complete ignition, electrical, and fuel systems ill and ignition wiring is routed and clamped in its original
positionInstallation
To prevent possible fire or explosion, make sure all electrical
1Position new powerhead gasketDo not use sealer on the gasket[':;12Coat driveshaft splines with OMC Moly LubeDo not coat top surface of driveshaft as lubricant here may prevent seating of driveshaft in crankshaft3Lower the powerhead assembly into placer:;l4Apply OMC Gasket Sealing Compound to threads of the eight powerhead retaining screwsInstall and torque the screws to 18-20 ftIbs(25-27 Nm)f315Install the exhaust housing to powerhead nutTighten the nut to 18-20 ftIbs(25-27 Nm)