1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 138Get this manual
STEPCHARGE COIL TEST Ground Test 12] 1Disconnect 5-pin Amphenol connector2Set peak-reading voltmeter to "POS" and "500"rJl 3Alternately, connect voltmeter between charge coil terminals and clean engine groundRefer to chart for terminal locationsCrank engine and observe meter reading at each connection Any reading on either test indicates charge coil or leads are grounded Locate and repair ground, or replace charge coil
Rope or Amp
PCE0068