1993 Johnson Evinrude "ET" 40 thru 55 Service Manual, P/N 508283, Page 122Get this manual
Stator ServicingCD II12 Amp Removal
"" To avoid accidental starting of engine while servicing, twist and remove all spark plug leads
1Remove the flywheelRefer to Flywheel Servicing, Page 3-82Disconnect stator yellow and yellowgray leads at terminal board 3Separate the stator 5-pin Amphenol connectorRemove the blackyellow stop circuit lead from terminal liE"4Remove stator retaining screws Installation
Remove any varnish around retaining screw holes on both sides of statorThe stator must have metal to metal contact with the crankcase head and its retaining screws2Position the stator on adapter and route the leads