1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 229Get this manual
12616Install the upper pinion bearing using OMC Pinion Bearing Installer, PIN 3198786112-16 38 inboltand wide washer Assemble the tools with lettered side of the bearing facing the installerDraw the upper pinion bearing into the gearcase until tool contacts gearcaseDisassemble tool components Assemble the tools with the lower pinion bearing facing installer toolDraw the lower pinion bearing into the gearcase until tool contacts gearcase r:;::;J 7If removed, position new forward bearing race in the gearcaseUsing OMCBearing Cup Installer, PIN 326025, and mallet, drive the bearing race into its bore until it is seatedr:;;;] 8The forward gear and bearing cone are serviced as an