1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 227Get this manual
r:t7l 14Inspect the driveshaft bearing in placeIf necessary, remove the bearing and sleeve using the slide hammer and OMCTwo-Jaw Puller, PIN 391012The jaws of the puller must be reversed so the jaw tips are facing inwardUse stiff rubber band to keep the jaws togetherf181 15Inspect the pinion bearings in placeIf necessary, remove the bearings using OMC Bearing Remover, PIN 319880Place shop cloth inside the gearcase to catch the bearings and toolIf pinion bearings are removed for any reason, they must be replaced
r:J9l1 6Temporarily install the gearcase head into the gearcase