1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 203Get this manual
11315Lubricate end of the pin, guides, roller, helix grooves, and
inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and place the pin into slots of the inner handlePlace the rollers on ends of the roller pin
11416Assemble theinhelix ofhalves onand slide the grip over idle the handle, place adjustment knob end handle, the
helixBe sure the speed indicator is positioned with the speed range and not 1800 outSnap the grip into place
11517Be cover handle screw retainer is in proper position and sure place on handleInstallation 1Insert the stop button wires and the throttle cable through the grommet in the lower engine cover2Attach the steering handle to the steering bracket3Secure the stop button ground lead to the powerhead4Insta ll blackyellow wire into plug