1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 198Get this manual
Assembly
1Install the lower engine cover to the exhaust housing'6l1sl2Place new a-ring on the shift leverInstall the shift rod EJ pinion with dot toward the port sideInstall the shift shaft gear with flat directly on topInsert the shift lever and engage shift shaft gearInstall and tighten the setscrew securelyf413Pack the gear cavity with OMC Triple-Guard greasePlace L!.J new a-ring on the exhaust housing coverInstall the cover and tighten the two screws securelyInstallation
f311Lubricate the upper mount blocks with liquid soap and place in position in the exhaust housing
[!] 2Slide the exhaust housing into the swivel bracket1213Place the two lower side mounts into the two lower mount housingsPut the port housing in place, insert the thrust mount and position the starboard housingSecure the lower mounts with screws