1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 179Get this manual

1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 179

Assembly
r:=J Proceed slowlyMake no forced assemblies unless pressing operation is called forAll internal components must be perfectly clean and lightly coated with Johnson or Evinrude Outboard LubricantINotel Use new gaskets, seals, and O-rings during assembly1If removed, install wrist pin bearing using OMC Bearing Installer and Remover, PIN 327645

When installing wrist pin bearing, the oil hole align with the hole in rod end

Back to 1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281