1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 125Get this manual

1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 125


STEPPOWER PACK OUTPUT TEST
To prevent accidental starting of engine while testing, twist and remove both spark plug leads
1Twist and remove primary leads from ignition coilsr,5l2Connect No.1 ignition coil primary lead to Stevens Instrument load adapter NoPL-88 red leadConnect adapter black lead to clean engine groundIf Stevens Instrument NoPL-88 is not available, you can make an adapter using 10-ohm, 10-watt resistor, Radio Shack No271-132, or equivalent3Set peak-reading voltmeter to "NEG" and "500"

Back to 1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281