1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 81Get this manual

1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 81

RemovalDeluxe

Avoid accidental starting of engine while servicing; twist and remove spark plug leads
1Remove low speed adjustment knob by pulling it straight outf1l2Remove retaining ring on choke knobPull knob out through hole in lower engine cover3Remove screwcam followerand link4Disconnect the fuel hose at the carburetor
[!] 5Remove two nuts, carburetor, and gasket6If necessary, remove intake manifold screws, and remove L!.Ileaf assembly and gaskets from the powerhead7Refer to Disassembly, Page 2-26InstallationDeluxe

INotel Do not use sealer on intake manifold or carburetor gasketsl' Replace any fuel hoses or fuel hose clamps if deteriorated or

Back to 1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281