1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 80Get this manual
f818Remove roll pin for fuel shut-off valve, and remove shut-off valve [!] 9Remove fuel hose(s) from carburetor10Remove screw, cam follower, and link
[DJ 11Remove two nuts, carburetor, and gasket1212If necessary, remove intake manifold screws, manifold, leaf plateand gaskets13Refer to Disassembly, Page 2-26Installation3, Note Do not use sealer on intake manifold or carburetor gaskets
i damaged
Replace any fuel hoses or fuel clamps if deteriorated or
1Attach the leaf plate and intake manifold using new gasketsTorque screws to 60-84 inIbs(7-9 Nm)2Using new gasket, place the carburetor in position and secure with nutsConnect the fuel hose(s) to the carburetor with tie strap using OMC Tie Strap Installation Tool, PIN 3237163Install cam follower and link4Install fuel shut-off valve