1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 76Get this manual
[DJ 7Install valve seatr:t2l8float valve into valve seat, and install float hinge Pin9Install needle jet
main jet
r:Jil10Install slow speed adjustment screw with spring on carburetor body11Install new float chamber gasketf14l12Check for correct positioning of float hingeFloat level controls the height of fuel in the float chamber and is critical to carburetor calibration and functionTop of float hinge should be in(2,3 mm), measured from the top of the gasket13Install float14Install float chamber on carburetor body15Using new gasket, install drain screw on float chamberInstallation