1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 65Get this manual
Installation 1Assemble the shut-off valve to the fuel tank2Install fuel tank on powerheadTighten screws to torque of 60-84 inIbs(7-9 Nm)3Connect the fuel hose to the carburetor with tie strap using OMC Tie Strap Installation Tool, PIN 323716 [!] 4Make certain water indicator hose is in positionin positionTighten two screws to hold cover6Install the port engine cover and all attaching screws
rv board engine cover on powerheadat OFF positionPlacevalve 5Make certain shut-off valve is starand align the shut-off
Integral Fuel Tank Servicing3
Removal 1Remove the lower engine covers
i and remove spark plug leads
'" 2Avoid accidental starting of engine while servicing; twist
i the hose when disconnectedPlug the hose with smooth
'" 3Disconnect fuel hose at the carburetorFuel will flow from