1993 Johnson Evinrude "ET" 2 thru 8 Service Manual, P/N 508281, Page 37Get this manual
i special locknuts and lockbolts used to attach the remote steering, shift, and throttle systems with the engineThese fasteners are made of special materials to resist weakening and rustingDo not substitute these fasteners with nuts and bolts which look the sameUsing the wrong nuts and bolts may result in sudden unexpected loss of engine control
"" 9If the engine is removed from boat, carefully store the
ill to corrosion, aging, lack of maintenance, or abuseInspect
mechanical steering cables for deterioration or cracksInspect hydraulic steering models for fluid leaks or other external signs of problemsFollow equipment manufacturer's maintenance and lubrication recommendations when servicing the steering system
10Inspect the entire boat steering system for damage due
11Remove battery and check its condition, water level, and chargeStore in cool, dry place, out of direct sunlightCheck the water level and charge periodically during storageRefer to Section for battery maintenance information12If equipped, service the boat fuel filter following instructions on canister13Remove propeller and check for damageA slightly bent propeller blade can hardly be noticed but will affect the performance of the engineClean and lubricate the propeller shaft with OMC Triple-Guard grease14Drain and refill gearcaseLubricate engineSee Lubrication, this section15Check engine carefullyMake sure screws and nuts are tightReplace damaged or worn parts