1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140, Page 112Get this manual

1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140, Page 112

PedalBase Servicing 1To replace either the pedal or the base, remove all of the attached components as described individually in this Section
2 Remove the steering cable as described in Steering Cable Replacement, Page 3- 14
r:J8l 3Using pressing pin and suitable press, remove the hinge
pin attaching the pedal to the base
4 Install bushings in foot control base
1201 Apply OMC Triple-Guard grease to the bushings and hinge :

Back to 1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140