1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140, Page 103Get this manual
Cable Servicing Thread cable through motor tube bracketPlace cable bullet in recessed area of motor tube bracket 1221 3
Route cable ends around cable drum and through each end of the deck bracket
1231 Place one washer and one nut on each end of the cableTighten both nuts equally to torque of 55-60 in Ibs(6-7 Nm)I Note The bow arm alignment must be adjusted after the unit is installed on the boatRefer to Motor to Guide Adjustment, Page 1-19