1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140, Page 78Get this manual

1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140, Page 78

Adapter Servicing Removal

[TI 1Remove three screws retaining motor assembly2Cut two motor leads at the splices
[!] 3Remove adapter set screw4Remove steering housing as described in Section 35Clamp motor tube in vee-jaw viseProtect the motor tube while clamping

6Apply light, even heat with propane torch to threaded area to soften the thread locking compoundTo avoid injury, use insulated gloves when handling warm adapter housing

Back to 1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140