1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140, Page 58Get this manual
Assembly f12l 1Position steering housing and ring on motor tube Align the set screws with existing dents in motor tube and tighten screws securely2 Solder the motor leads in place on the switchesRefer to wiring diagram, at the end of this Section, for correct wire locationsr:J3l 3Position the forwardreverse switch and secure with two
1141 Apply OMC Triple-Guard grease to spring on rotary switch 11 41 Apply OMC Triple-Guard grease to control handle6Install the control handle and stopr.J6l 7Apply OMC Screw Lock to the set screwInstall set screw and torque to 25-35 inIbs(2,8-4,0 Nm)