1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140, Page 46Get this manual
Power Supply Continuity TestHand Control Models
INote equipment, disconnect the battery troubleshooting To avoid damaging components or cables before
proceeding 1Use continuity light or ohmmeter calibrated on high ohms scale to test continuity2Connect one meter lead to electric outboard RED battery cable Leave this meter lead connected for all the following tests3If equipped, move 12 24 switch to 24 lead at circuit breaker1 12 modelsconnect second meter lead to RED gao 65
The meter must show continuity If meter shows no continuity, repair or replace battery cables
1661 524 modelsconnect second meter lead to RED ga o
lead at 12 24 switch The meter must show continuity If meter shows no continuity, repair or replace battery cables