1992 Johnson Evinrude "EN" Electric Outboards Service Manual, P/N 508140, Page 39Get this manual
Motor Tube WiringHand Control Models To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding 1361 1
Remove the steering housing cover
2Turn the speed control switch "OFF 3Use an ohmmeter calibrated on low ohms scale to test the condition of the resistor assembly and motor tube wiring 9836
1371 41381
Connect the ohmmeter between the RED GREEN 16 gao leads The meter must show .2 .03 ohm
5Connect the ohmmeter between the GREEN 16 ga and GREENWHITE 16 gao leads The meter must show 0.4 .04 ohm
6Refer to Resistor AssemblyAll Models, Page 2-17, if your test resu Its va ry