1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 382Get this manual
1341 16With the tilt cylinder secured
in soft-jaw vise, slide the band over the cylinderOil and install the O-ring on the band nutInstall the band nut into the cylinderInstall the band nut loosely
1351 17Slide the piston and rod assembly into the cylinder but do 1361 18
not engage the threads of the capSet the assembly aside at this timeRemove the three oil reservoir retaining screws with washersRemove the oil reservoir from the manifoldClean and inspect the oil reservoir, retaining screws, washers, and O-ringReplace any components, if necessaryRemove the three screws reservoir filter Q)