1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 355Get this manual

1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 355

Installation
Place trimtilt unit into positionApply OMC Triple-Guard grease to the lower pin, and install the pin
i ftIbs(68-73 Nm), then loosen one nut by V8 to V4 turn
'" 2If loosened, tighten the tilt tube nut to torque of 50-54

3: Instal.1 external snap rings on lower pin with sharp edge of ring facing out4Extend tilt cylinder rod to match with holes in swivel bracket

Back to 1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145