1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 353Get this manual
1351 20Using OMCRod Holder, PIN 983213, clamp rod tightly in viseLubricate end cap and slide it on the rodInstall wear plate on rod end and torque to 84-108 inIbs(9,5-12 Nm)Assembly
rv cylinder body.five new pump manifold O-rings and place in 1Lubricate 2Attach pump manifold assembly to cylinder body with three Allen head screws, and torque to 60-84 inIbs(7-9 Nm)
3Lubricate and install the manual release valveThread the valve all the way into the manifold and torque to 45-55 inIbs(5-6 Nm)Install the retaining ring with the sharp edge of the ring facing out4Lubricate new motor O-ringPlace it on the motor and attach the motor to the pump manifold assembly with four Pozidriv screwsTorque the screws to 35-52 inIbs(4-6 Nm)Secure wire shield to pump manifold assembly