1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 347Get this manual

1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 347

f81 7Remove the ground wire from the trimtilt unit using No.3 Pozidriv tool 19l 8Separate the trimtilt unit wires in the braided tube to permit
removal through the hole in the stern bracket9Remove the external snap rings from the upper pin
[!!] 10Use punch to remove the upper pin11Retract the tilt cylinder rod12 112Remove the external snap rings from the lower pin 13Use punch to remove the lower pin

Back to 1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145