1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 263Get this manual
t!J LZJ impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24 Nm)Use new tab-lock washer each time, and bend tabs around driveshaft nut to secure
[:;1 9Assemble remaining shims, new tab-lock washer, and
l!J Gasket Sealing Compound to threads of six retaining screws
and install them finger tight only
r:;t 10Assemble intake housing to main housingApply OMC
Check for any rubbing or binding between the casing liner and impellerIf clearance is greater on one side, verify that the intake housing is centeredTorque screws in crisscross pattern to 10-12 ftIbs(14-16 Nm)
[!] 11Repeat Step to verify adjustmentGate Adjustment 1Move remote control handle to NEUTRAL detent