1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 260Get this manual
1 Assembly '11 1Ifthe reverse gate was removed during disassembly, install reverse gatebushings ,and shafts to jet housingPosition shafts so holes align with holes where retaining screws make contact2Torque screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely3Place roller into cam in position shownThe roller will not assemble in any other positionrJl 4Place cam roller on reverse gate stud, and torque nut to 60-84 inIbs(7-9 Nm)5Install bushingeccentric nutand cam screw