1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 255Get this manual
Bearing Housing Assembly Servicing 1Remove water pump assembly from jet housing L!J bearing housing assembly from jet housingunsnapping the ring from the pliers
2Remove four bearing housing retaining screws, and remove "" 3Remove retaining ring with retaining ring pliersWear
i safety glasses and proceed with care to avoid
4Remove O-rings from housing and discard1al 5Warm bearing housing with propane torch to aid in removal of upper seal carrier
not apply too much heat as seals or carrier may be damaged
"" 6Allow bearing housing to cool until it is warm to the