1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 254Get this manual
f711s19Remove the rear screw and spacer retaining jet housing to exhaust housingRemove four screws and lock washers through the opening in the housingRemove bearing housing, driveshaft, water pump, and jet housing as an assemblyGate Removal
1Remove cam screweccentric nutand bushings r,Q12Remove cam roller nut, and remove cam assembly from reverse gate arm3Move roller to position shown, and remove roller from cam1,2l4Remove screws retaining reverse gate shaftsWith punch and mallet, lightly tap shafts from housingIf forward stop is to be replaced, remove screwand remove stop and spring5Remove reverse gate from housing, and inspect shaft bushingsReplace if worn or damaged