1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 243Get this manual
2Select the correct gauge and collar: V4OMC Gauge PIN 328366 and OMC Collar PIN 328362 V6OMC Gauge PIN 328367 and OMC Collar PIN 328362
1Jl 3Slide the collar onto the driveshaft with large end in contact with the bearing housing1,l1ol 4Insert the assembled driveshaft into the tool base and tighten preload screw against the driveshaft until groove on the spring-loaded plunger is flush with end of threadsTighten locking ring on preload screw
5Rotate the driveshaft several revolutions to seat bearings