1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 223Get this manual
Inspection 1Inspect the throttle cable for kinks and wearReplace if necessary2Inspect the steering handle components for wear, cracks, and other damageReplace if necessary3Refer to Ignition System, Section 3, to test the stop buttonAssembly f151 1If removed, apply Loctite Depend Adhesive to inner handle on areas shown 15
1161 Install the metal outer handle over the plastic inner handle and drive the outer handle into placer:J7l 3Secure tab of the inner handle into recess of the outer handle with the steel pinr:J8l 4Place small braided tube with stop switch wires into large braided tube with throttle cable5Install throttle friction control on outer handle6Install the handle end of the throttle cable in the inner handleSnap the trunnion into recess in the handleInstall the retainer clip