1992 Johnson Evinrude "EN" 90 deg. Cross V Service Manual, P/N 508145, Page 218Get this manual
12s1 '" 11Install the starboard locknutReplace locknut if definite resistance is not felt12s1 '" 12Torque starboard tilt tube nut to 50-54 ftIbs(68-73 Nm), then loosen nut 1a to 14 turn1291 13Install the tilt cam and collar on the tilt tube1301 14Install the steering shaft and thrust washerr:::;l 15Install the steering shaft keeperApply OMC Locquic L!J Primer and OMC Nut Lock to the splines of the steering shaft and lower mount bracketr:;:;J 16Install the lower mount bracket and new locking nut with its unstaked side facing the mount bracketAlign the bracket with the steering arm and torque the nut to 130-150 ftIbs(176-203 Nm) 17Fill the swivel bracket with OMC Tripe-Guardgrease through the grease fitting on the bracket's port sideLubricate the tilt tube, swivel bracket, and stern brackets through the forward grease fittings18Install the exhaust housing as described in this section